The fan wobbles

Check that all blade and blade arm screws are tight.
Most fan wobble problems are caused by unequal blade levels. Check this level by selecting a point on the ceiling above the tip of one of the blades. Measure from a point in the center of the blade to a point on the ceiling. Rotate the fan until the next blade is positioned for measurement, and measure from the same point on each blade to the ceiling. Repeat this for each blade. Any measurement deviation should be within 1/8 inch. Run the fan for ten minutes. If the fan continues to wobble, place the balance sticker that came with your ceiling fan purchase further away from the top of the ceiling fan.

Updated on April 19, 2024