Installing a universal ceiling fan remote control is an excellent update for any downrod pull chain ceiling fan. It can add additional functionality and can make it easier to simply adjust the speed of the fan or turn on and off the light kit.
The installation process requires the installation of a remote control receiver. Follow these simple steps to install:
1.Use existing pull chains on the desired fan to set fan speed to HIGH and to turn the light ON.
2.Turn off circuit breakers and wall switch to the fan. DANGER: Failure to disconnect power supply prior to installation may result in serious injury or death.
3.Lower the canopy of the previously assembled fan and insert receiver into the mounting bracket with antenna end first and the flat side facing the ceiling. Note: If installing this product with a new fan, insert the receiver in the mounting bracket before wiring the fan; wire the fan according to these instructions, then continue fan assembly as directed in the fan’s instruction manual.
4.Disconnect existing wire connections (if applicable), then secure all wire connections with wire connectors according to diagram and these steps:
White receiver wire(AC IN N)………….. White supply wire
White receiver wire(TO MOTOR N)..White com(FAN/LIGHT N) wire
Black receiver wire(TO MOTOR L)……….. Black fan wire
Blue receiver wire(TO LIGHT L)…………… Blue light wire
5.Reinstall the top cover.
6.Turn on the power and wall switch for the fan.
7.Remove the battery door from the back of the remote using a flat-head screwdriver (not included). Insert the batteries into the remote control, then attach the battery door. Press the HIGH SPEED button and make sure the LED is lit and the fan is on.
8.If desired, the wall bracket can be attached to a wall using the mounting screws.